My Nana Swore By This 1 Trick To Clean Jewelry With Almost 0 Work—And It Works Wonders! 💍✨
Step-by-Step Instructions
Prep time: 2 minutes | Soak time: 15-20 minutes | Effort: Extremely LowMaterials Required:
- 1 small bowl
- 1 cup of warm to hot water (not boiling)
- 3-5 drops of liquid dish soap
- Optional: 1 soft-bristled baby toothbrush (for heavily detailed pieces)
- 1 lint-free microfiber cloth
Directions:
Step 1: Set Up the Safe Zone
Before you start, make sure you are working far away from any open drains! If you are working near a sink, plug the drain completely to avoid any heartbreaking accidents.
Step 2: Mix the Solution
Fill your small bowl with a cup of warm water. Add 3 to 5 drops of your mild dish soap. Give it a gentle stir until the water is nice and sudsy.
Step 3: The Zero-Work Soak
Gently drop your gold, platinum, and diamond jewelry pieces directly into the soapy water. Now, walk away! Let them sit undisturbed for 15 to 20 minutes.
Step 4: The Gentle Detail (If Needed)
For most pieces, the soak alone will dissolve the grime. However, if you have complex settings or hidden crevices under diamonds, pick up the jewelry and give it a very gentle sweep with an ultra-soft baby toothbrush. The bristles will effortlessly sweep out the loosened debris.
Step 5: Rinse and Buff
Rinse your jewelry thoroughly in a separate bowl of clean, lukewarm water to remove any remaining soap residue. Pat the pieces dry with a clean, lint-free microfiber cloth and buff them gently to reveal a mirror-like shine.
